Do you need to update your stencil? lost the original? That last bit of the cardboard box fort do the kids use it for? Want to cover everything in the PRL logo?

APPLICATION

• Honda Civic (2016, 2017, 2018, 2019, 2020, 2021)

HOW TO INSTALL AN INTERCOOLER STENCIL?

1. Clean and make sure your intercooler is dry.
2. Place the cardboard stencil onto the front of the intercooler (Make sure the intercooler is not upside down, the PRL logo is on the driver’s side end tank).
3. It is recommended to tape down the stencil to have a sharp logo and to avoid moving.
4. Mask off or cover the end tanks to avoid overspray.
5. Apply a high temp engine enamel style spray paint (we recommend Duplicolor DE1635 Ford SemiGloss Black, any color can be used).
6. Multiple coats may be needed to have full coverage, this varies per color.
7. Allow drying 30-60 minutes before installing the intercooler.
8. If any mistakes are made such as runs/overspray acetone or paint thinner can be used to remove any unwanted paint or to remove the stencil entirely, though this will take some time.