This nitrogen fill tool is needed to check or refill the nitrogen charge when servicing ICON 2.0 and 2.5 smooth body shocks, as well as 2.5 non-reservoir coil over shocks. On these shocks we use an in house CNC machined charge port which has a low profile design for clearance. The ICON nitrogen fill tool is required to puncture a rubber plug in the charge port, allowing nitrogen into the shock through the hypodermic needle.Additional Attributes:GTIN:00840103401577Material:BrassAttachment End Type:ThreadedAAP_UDA_12:EAAAP_UDA_22:1AAP_UDA_4:55California Proposition 65:WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.Extended Information:Emissions :Emissions Compliance ExemptLife Cycle Status:Available To OrderPackaging:Quantity of Each:1.0Package UOM:EADimension:1.0000 x 4.0000 x 9.0000 inchesWeight:1.0000 PGPDF:I252004_REVA